The Compacting Granulating Machine is an industrial DG Series machine for producing compacted strips or flakes and screened granules from fine fertilizer and industrial powders. Counter-rotating rollers provide the forming force, while the downstream system controls particle size and recycle.

| Model | DG-200 | DG-300 |
| Motor power | 15KW | 30KW |
| Output | Oblate shape 900-1300 kg/h | Oblate shape 1600-2100 kg/h |
| Reducer | Adopt hard tooth surface dedicated reducer | |
| Roller | Forged with alloy steel, heat treatment in special process, the surface of press roll can be plated with hard chromium to have rustproof and wear-resistant treatment. | |
| Rate of finished product | Oblate shape 60-90% | |
| Granular diameter | 3.8、4.2、4.5、5、5.5、6.0、6.5、8、10mm | |
| Granular shape | Oblate、irregular、strip、slice | |
| Moisture of raw material | Inorganic materials: 2-5%, organic materials: 6-12% | |
| Working temperature | Normal temperature | |
| Applicable materials | Ammonium carbonate, ammonium chloride, ammonium sulfate, ammonium phosphate, calcium magnesium phosphate, potassium chloride, potassium nitrate, potassium sulfate, humic acid, magnesium sulfate, zinc sulfates as well as all kinds of organic matters, etc | |
Reference values from the existing DG product information. Actual output, yield, moisture target, and line scope depend on feed properties, product specification, and process configuration.

Q: What feed moisture is recommended for the Compacting Granulating Machine?
A: DG reference moisture is 2-5% for inorganic feed and 6-12% for organic feed. These are starting ranges; the final target must be confirmed for the exact formulation and local conditions.
Q: Does DG granulation require added water or a binder?
A: Not always. Some materials form under pressure with only moisture conditioning, while others need a small binder addition. Fuyi confirms the recipe through representative material testing.
Q: What particle sizes and shapes can the DG machine produce?
A: Typical products include 2-6 mm irregular granules and 4-10 mm oblate granules. Reference diameter options are 3.8, 4.2, 4.5, 5, 5.5, 6, 6.5, 8, and 10 mm, with strip or slice products also available.
Q: How are DG-200 and DG-300 selected?
A: Selection is based on feed properties, required output, product shape and size, yield, roller surface, corrosion or wear conditions, recycle load, available utilities, automation, and the complete line scope.
Q: What is the difference between compaction and granulation?
A: Compaction forms a dense strip or flake; granulation then breaks and classifies that compact into the target particle size. The DG system can integrate both steps.