Hydraulic roller press compactor

HomeHydraulic roller press compactorDouble Roll Compactor Machine

Double Roll Compactor Machine

Fuyi's Double Roll Compactor Machine provides a continuous dry-compaction solution for processing fine dry powders into high-density flakes and 2-5 mm granules. The machine combines forced feeding, roller pressing, crushing, screening, and recycle in one configurable process.

WhatsApp Now
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
  • Detailed Intro
  • Tech Specs
  • Plant Layout
  • Design Features
8.jpg
Double Roll Compactor Machine Introduction
During operation, fine dry powders with a recommended moisture content of 1% or less is metered into the machine by a controlled screw-feeding system. The feed is conveyed, degassed, and pre-compressed before entering the gap between two counter-rotating rollers.
Under adjustable external pressure, the material is compressed into dense sheets or flakes. Its actual density can increase by approximately 1.5-3 times during compaction. The flakes are then crushed, granulated, and screened to produce a standard finished size of 2-5 mm, while suitable off-size material can be returned to the process.
Two counter-rotating rollers create continuous compression across the working width, while the downstream crusher and screen control the final particle size.

Key Technical Specifications
Parameter
Roller Diameter360 mm
Valid Usable Width170 - 230 mm
Flakes Output1.3-2.3 t/h
Finished Product Output0.9-1.3 t/h
Compactor Power30-37 kW
Compactor Weight~7 t
Note: Finished product output is a reference value. Final output depends on material characteristics, process, and operation.

Reference values. Actual output depends on feed properties, finished-product requirements, and plant configuration. Final model and installed power are confirmed after material testing and process design.

Double Roll Compactor Machine Advantages
Dry Process with No Separate Drying Stage
For suitable low-moisture feed, granulation can be completed without adding process water. This simplifies the flowsheet and avoids the energy demand and equipment footprint of a separate dryer.
Stable High-Pressure Compaction
Adjustable roller pressure and gap control help form dense flakes and achieve the required strength while accommodating changes in feed bulk density and particle distribution.
Continuous Double-Roll Compaction
The counter-rotating roll arrangement provides steady, continuous compression and supports stable operation from pilot-scale trials to large industrial production.
Controlled Particle Size and Material Recycle
The crushing and screening system produces a standard 2-5 mm finished product. Suitable oversized and undersized material can be recycled to improve raw-material utilization.
Scalable and Customizable DH Series
Models from DH360 to DH1500 cover pilot-scale testing through large industrial production. Feeders, rollers, hydraulic systems, crushers, screens, and automation can be configured for the project.

FAQ

Q: What feed moisture is recommended for the Double Roll Compactor Machine?

A: For the standard DH dry process, feed moisture is normally controlled at 1% or less. The practical limit must be verified for the customer's specific material and local storage conditions.


Q: Does the process require a binder?

A: For suitable dry powder, a binder is normally not required. Mechanical pressure forms the flakes, which are then crushed and screened into granules. Representative testing confirms the final operating recipe.


Q: What finished particle size can the machine produce?

A: The standard DH parameter range is 2-5 mm. Other product-size requirements can be evaluated by changing the crushing and screening configuration.


Q: How is the correct DH model selected?

A: Model selection is based on required output, feed bulk density, moisture, particle size, compressibility, target granule strength, available utilities, and the required production-line scope.


Q: What information is needed to calculate the roller compactor machine price?

A: The quotation depends on material properties, required output, roller size, pressure system, crusher and screen configuration, automation level, and the scope of the production line.

Please Contact Us!

About Us
FUYI – Specialized in roller compaction and granulation systems, providing integrated solutions for global industrial customers with reliable technology, large capacity and full-process engineering services.
Subscribe to our newsletter
Promotions, new products and sales. Directly to your inbox.
Contact FUYI for Your Custom Solution
Tell us your material type, capacity demand and project requirements, and our engineering team will provide you with a professional compaction, granulation or briquetting solution as soon as possible.
Company Name
*
This field is required
Email
*
This field is required
Email format error
Phone
This field is required
Telephone information is wrong!
Message
*
This field is required
Send Message