Wet type double roller granulator

HomeWet type double roller granulatorKCL DG Double Roller Granulator Machine

KCL DG Double Roller Granulator Machine

Fuyi's KCL DG Double Roller Granulator Machine provides continuous roller-extrusion granulation for KCL powder or fertilizer fines, producing granular potassium chloride. The process integrates stable feeding, pressure forming, and product classification.

WhatsApp Now
WHAT ARE YOU LOOKING FOR?
*
This field is required
Total quantity you need
*
This field is required
*
This field is required
Email format error
Due to email instability, you might miss our correspondence. Please provide your phone number for alternative contact.
This field is required
Telephone information is wrong!
Send Message
  • Detailed Intro
  • Tech Specs
  • Plant Layout
  • Design Features

9.jpg
Product Introduction
During operation, KCL powder or fertilizer fines is prepared to a stable particle distribution and moisture window, then metered continuously into the gap between two counter-rotating rollers. As a general DG reference, inorganic feed is controlled at 2-5% moisture and organic feed at 6-12%; the practical target is confirmed by testing the customer's material.
Adjustable mechanical pressure forms oblate particles directly or creates strips and sheets for downstream crushing. Screening can produce 2-6 mm irregular granules or 4-10 mm oblate granules, while suitable oversize and undersize material returns to the process. Drying demand depends on incoming moisture, any liquid or binder added, climate, and the required storage specification.
KCL is the chemical abbreviation for potassium chloride. The DG machine densifies and forms fine KCL into granules with improved flow, lower dust, and better suitability for blending.

Key Technical Specifications
ModelDG-200DG-300
Motor power15KW30KW
OutputOblate shape 900-1300 kg/hOblate shape 1600-2100 kg/h
ReducerAdopt hard tooth surface dedicated reducer
RollerForged with alloy steel, heat treatment in special process, the surface of press roll can be plated with hard chromium to have rustproof and wear-resistant treatment.
Rate of finished productOblate shape 60-90%
Granular diameter3.8、4.2、4.5、5、5.5、6.0、6.5、8、10mm
Granular shapeOblate、irregular、strip、slice
Moisture of raw materialInorganic materials: 2-5%, organic materials: 6-12%
Working temperatureNormal temperature
Applicable materialsAmmonium carbonate, ammonium chloride, ammonium sulfate, ammonium phosphate, calcium magnesium phosphate, potassium chloride, potassium nitrate, potassium sulfate, humic acid, magnesium sulfate, zinc sulfates as well as all kinds of organic matters, etc

Reference values from the existing DG product information. Actual output, yield, moisture target, and line scope depend on feed properties, product specification, and process configuration.

Product Advantages
Normal-Temperature Roller Granulation
The DG process uses controlled mechanical pressure rather than a high-temperature forming stage. For suitable feed already within its moisture window, the line can reduce or avoid a separate drying step.
Configurable Size, Shape, and Yield
Roller pattern, pressure, crusher, and screen can be selected for oblate, irregular, strip, or slice products. The reference finished-product rate is 60-90%, subject to material and recycle conditions.
KCL-Specific Forming Control
Roller settings and screen size can be optimized for KCL crystal distribution, moisture, target product size, and required crushing strength.
Screening with Closed-Loop Recycle
Suitable oversize and undersize material can return to the feed system, improving raw-material utilization and helping stabilize the product-size distribution.
Two Practical DG Models
DG-200 and DG-300 provide reference oblate-granule outputs of 900-1300 kg/h and 1600-2100 kg/h. Feed preparation, rollers, crusher, screen, conveying, and controls can be customized for the project.

FAQ

Q: What feed moisture is recommended for the KCL DG Double Roller Granulator Machine?

A: DG reference moisture is 2-5% for inorganic feed and 6-12% for organic feed. These are starting ranges; the final target must be confirmed for the exact formulation and local conditions.


Q: Does DG granulation require added water or a binder?

A: Not always. Some materials form under pressure with only moisture conditioning, while others need a small binder addition. Fuyi confirms the recipe through representative material testing.


Q: What particle sizes and shapes can the DG machine produce?

A: Typical products include 2-6 mm irregular granules and 4-10 mm oblate granules. Reference diameter options are 3.8, 4.2, 4.5, 5, 5.5, 6, 6.5, 8, and 10 mm, with strip or slice products also available.


Q: How are DG-200 and DG-300 selected?

A: Selection is based on feed properties, required output, product shape and size, yield, roller surface, corrosion or wear conditions, recycle load, available utilities, automation, and the complete line scope.


Q: Can KCL granules be produced in several sizes?

A: Yes. Roller pockets or downstream crushing and screening can be configured for the required range, subject to yield and strength confirmed by testing.

Please Contact Us!

About Us
FUYI – Specialized in roller compaction and granulation systems, providing integrated solutions for global industrial customers with reliable technology, large capacity and full-process engineering services.
Subscribe to our newsletter
Promotions, new products and sales. Directly to your inbox.
Contact FUYI for Your Custom Solution
Tell us your material type, capacity demand and project requirements, and our engineering team will provide you with a professional compaction, granulation or briquetting solution as soon as possible.
Company Name
*
This field is required
Email
*
This field is required
Email format error
Phone
This field is required
Telephone information is wrong!
Message
*
This field is required
Send Message