Fuyi's Mixer Granulator Equipment is a configurable DG Series production solution for converting uniformly blended fertilizer or chemical formulations into roller-granulated products with consistent composition. The line is engineered around normal-temperature double-roller extrusion, downstream size control, and closed-loop recycle.

| Model | DG-200 | DG-300 |
| Motor power | 15KW | 30KW |
| Output | Oblate shape 900-1300 kg/h | Oblate shape 1600-2100 kg/h |
| Reducer | Adopt hard tooth surface dedicated reducer | |
| Roller | Forged with alloy steel, heat treatment in special process, the surface of press roll can be plated with hard chromium to have rustproof and wear-resistant treatment. | |
| Rate of finished product | Oblate shape 60-90% | |
| Granular diameter | 3.8、4.2、4.5、5、5.5、6.0、6.5、8、10mm | |
| Granular shape | Oblate、irregular、strip、slice | |
| Moisture of raw material | Inorganic materials: 2-5%, organic materials: 6-12% | |
| Working temperature | Normal temperature | |
| Applicable materials | Ammonium carbonate, ammonium chloride, ammonium sulfate, ammonium phosphate, calcium magnesium phosphate, potassium chloride, potassium nitrate, potassium sulfate, humic acid, magnesium sulfate, zinc sulfates as well as all kinds of organic matters, etc | |
Reference values from the existing DG product information. Actual output, yield, moisture target, and line scope depend on feed properties, product specification, and process configuration.

Q: What feed moisture is recommended for the Mixer Granulator Equipment?
A: DG reference moisture is 2-5% for inorganic feed and 6-12% for organic feed. These are starting ranges; the final target must be confirmed for the exact formulation and local conditions.
Q: Does DG granulation require added water or a binder?
A: Not always. Some materials form under pressure with only moisture conditioning, while others need a small binder addition. Fuyi confirms the recipe through representative material testing.
Q: What particle sizes and shapes can the DG machine produce?
A: Typical products include 2-6 mm irregular granules and 4-10 mm oblate granules. Reference diameter options are 3.8, 4.2, 4.5, 5, 5.5, 6, 6.5, 8, and 10 mm, with strip or slice products also available.
Q: How are DG-200 and DG-300 selected?
A: Selection is based on feed properties, required output, product shape and size, yield, roller surface, corrosion or wear conditions, recycle load, available utilities, automation, and the complete line scope.
Q: Is the mixer itself the DG granulator?
A: No. The mixer homogenizes the formulation; the DG double roller machine then compacts and forms the material. Both can be supplied as coordinated line equipment.