The Zinc Sulphate DG Double Roller Granulator Machine is an industrial DG Series machine for producing uniform zinc sulphate micronutrient granules from zinc sulphate powder. Counter-rotating rollers provide the forming force, while the downstream system controls particle size and recycle.

| Model | DG-200 | DG-300 |
| Motor power | 15KW | 30KW |
| Output | Oblate shape 900-1300 kg/h | Oblate shape 1600-2100 kg/h |
| Reducer | Adopt hard tooth surface dedicated reducer | |
| Roller | Forged with alloy steel, heat treatment in special process, the surface of press roll can be plated with hard chromium to have rustproof and wear-resistant treatment. | |
| Rate of finished product | Oblate shape 60-90% | |
| Granular diameter | 3.8、4.2、4.5、5、5.5、6.0、6.5、8、10mm | |
| Granular shape | Oblate、irregular、strip、slice | |
| Moisture of raw material | Inorganic materials: 2-5%, organic materials: 6-12% | |
| Working temperature | Normal temperature | |
| Applicable materials | Ammonium carbonate, ammonium chloride, ammonium sulfate, ammonium phosphate, calcium magnesium phosphate, potassium chloride, potassium nitrate, potassium sulfate, humic acid, magnesium sulfate, zinc sulfates as well as all kinds of organic matters, etc | |
Reference values from the existing DG product information. Actual output, yield, moisture target, and line scope depend on feed properties, product specification, and process configuration.

Q: What feed moisture is recommended for the Zinc Sulphate DG Double Roller Granulator Machine?
A: DG reference moisture is 2-5% for inorganic feed and 6-12% for organic feed. These are starting ranges; the final target must be confirmed for the exact formulation and local conditions.
Q: Does DG granulation require added water or a binder?
A: Not automatically. Moisture adjustment or a binder may be required for some feeds, depending on composition, particle size, natural binding behavior, target strength, and storage specification. A representative test confirms the recipe.
Q: What particle sizes and shapes can the DG machine produce?
A: Typical products include 2-6 mm irregular granules and 4-10 mm oblate granules. Reference diameter options are 3.8, 4.2, 4.5, 5, 5.5, 6, 6.5, 8, and 10 mm, with strip or slice products also available.
Q: How are DG-200 and DG-300 selected?
A: Selection is based on feed properties, required output, product shape and size, yield, roller surface, corrosion or wear conditions, recycle load, available utilities, automation, and the complete line scope.
Q: Does zinc sulphate grade affect machine configuration?
A: Yes. Monohydrate or heptahydrate content, free moisture, corrosiveness, particle size, and target product specifications must be identified first.